English

Renewable Design for Vial Filling Machine Uk - Glass Bottle IV Solution Production Line – IVEN

Renewable Design for Vial Filling Machine Uk - Glass Bottle IV Solution Production Line – IVEN Featured Image
  • Renewable Design for Vial Filling Machine Uk - Glass Bottle IV Solution Production Line – IVEN
  • Renewable Design for Vial Filling Machine Uk - Glass Bottle IV Solution Production Line – IVEN
  • Renewable Design for Vial Filling Machine Uk - Glass Bottle IV Solution Production Line – IVEN

Brief Introduction:


Product Detail

Product Tags

Related Video

Feedback (2)

Our growth depends on the superior equipment ,exceptional talents and continuously strengthened technology forces for Vial Mixer Machine, Intravenous Therapy Production Line, Glass Vial Manufacturing Machine, We are going to provide most effective quality, quite possibly the most current market aggressive rate, for each and every new and outdated consumers with the most great environmentally friendly solutions.
Renewable Design for Vial Filling Machine Uk - Glass Bottle IV Solution Production Line – IVEN Detail:

Introduction

Glass bottle IV solution production line is mainly used for IV solution glass bottle of 50-500ml washing, depyrogenation, filling and stoppering, capping. It can be used for the production of glucose, antibiotic, amino acid, fat emulsion, nutrient solution and biological agents and other liquid etc.

011
2
3

Product Video

Step 1

Washing machine:
This machine is used for the fine washing for infusion glass bottle, take turns to use the normal water, purified water, injection water, clean compressed air, fresh injection water and clean compressed air to washing the bottle in turns.

4
5

Step 2

Depyrogenation Tunnel
Laminar flow sterilization tunnel used for washed vial’s dry sterilization and remove heat, It can reach the highest temperature 300～350℃, efficient sterilization time for 5-10 minutes.
It has three working area (Preheat area, heating area, cooling area).

6

Step 3

Filling, Vacuuming, Nitrogen Charging, Stoppering Machine
Filling part adopts Germany GEMU valve filling, high precision.
Nitrogen charging immediately after filling, also nitrogen protection between the nitrogen charging and stoppering.

No bottles no filling, no bottles no vacuuming, no bottle no nitrogen charging, ensure the vacuum level in the air tank during vacuuming, meanwhile, make sure the oxygen residual after stoppering (control within 1.0%)。

7
8
9

Step 4

Filling and Stoppering Machine
Aseptic liquid filling machine is very accurate and stable operation. The filling volume can be directly adjusted through HMI, here we have ORABS equipped with stainless steel laminar air flow hood.

11

Step 5

Capping Machine
It is mainly used for glass bottles capping. Continuous operation. Picking up and crimping, at the same time rolling the cap. After the completion, the cap have the same size and edge smooth, good appearance. High-speed, low damaged.

12
13
14

Advantages:

1.Separate pipeline for cleaning medium, no cross-contamination, according to GMP requirements.
2.Filling head synchronously tracks filling, high filling accuracy.
3.Adopt full servo drive system, no mechanical transmission.
4.Nitrogen charging function can be configured (before filling, during filling, after filling).
5.Quick changeover time for different bottle size.

Application in hospital:

15

Technical Specifications:

Filling, Nitrogen Charging, Stoppering Machine

Item

 Machine model

CNGFS16/10

 CNGFS24/10 CNGFS36/20 CNGFS48/20
Production capacity 60-100BPM 100-150BPM 150-300BPM 300-400BPM
Applied bottle size 50ml, 100ml, 250ml, 500ml
Filling accuracy ±1.5%
Compressed air (m³/h) 0.6Mpa 1.5 3 4 4.5
Power supply KW 4 4 6 6
Weight T 7.5 11 13.5 14
Machine size (L×W×H)(MM) 2500*1250*2350 2500*1520*2350 3150*1900*2350

3500*2350*2350
Product detail pictures:

Renewable Design for Vial Filling Machine Uk - Glass Bottle IV Solution Production Line – IVEN detail pictures

Renewable Design for Vial Filling Machine Uk - Glass Bottle IV Solution Production Line – IVEN detail pictures

Renewable Design for Vial Filling Machine Uk - Glass Bottle IV Solution Production Line – IVEN detail pictures

Related Product Guide:
Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Renewable Design for Vial Filling Machine Uk - Glass Bottle IV Solution Production Line – IVEN , The product will supply to all over the world, such as: Romania, Netherlands, Germany, We set a strict quality control system. We have return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our products. Please feel free to contact us for further information and we will offer you competitive price list then.
    • This supplier stick to the principle of Quality first, Honesty as base, it is absolutely to be trust.
    5 Stars By Candy from Romania - 2017.03.08 14:45
    The supplier abide the theory of quality the basic, trust the first and management the advanced so that they can ensure a reliable product quality and stable customers.
    5 Stars By Salome from Belgium - 2017.03.28 16:34

    Send your message to us:

    Write your message here and send it to us

    Products categories

    Send your message to us:

    Write your message here and send it to us