OEM/ODM Manufacturer Vial Filling Machine Isolator - PP Bottle IV Solution Production Line – IVEN
OEM/ODM Manufacturer Vial Filling Machine Isolator - PP Bottle IV Solution Production Line – IVEN Detail:
PP Bottle IV Solution Production Line
Preform/Hanger Injection machine
+ Bottle blowing machine
+ Washing-Filling-Sealing machine
Introduction
Automatic PP bottle IV solution production line includes 3 set equipment, Preform/Hanger Injection machine, Bottle blowing machine, Washing-Filling-Sealing machine. The production line has the feature of automatic, humanized and intelligent with stable performance and quick and simple maintenance. High production efficiency and low production cost, with high quality product which is the best choice for IV solution plastic bottle.
Product Video
Application
It can be applied to 50-5000ml Non-PVC soft bag for general solution, special solution, dialysis solution, parenteral nutrition, antibiotics, irrigation and disinfectant solution etc.
PP bottle blowing machine
Step 1
Preform loading station:
Plenty of preforms are put into the hopper, then the rotary preforms feeding system convey preforms through hoisting conveyor. Independent horizontal splitting preform controlled interval screw preform loading.
Step 2
Separate arranging, rotation, equidistance screw arranging mechanism for preform:
The preforms are divided with equal distance and transmitted to vertical rotary disk, then rotated by 180 degree and move to another horizontal preforms arranging disk. No preform blockage and no deviation with accurate position.
Step 3
Preform heating:
Double row heating light box design, good heat dissipation, easy replacement and maintenance.
Step 4
Preform taking, preform and bottle transmission mechanism:
Servo open type servo flexible transmission, the cam clamping fingers without plastic scrap and powder to ensure product quality.
Step 5
Independent sealing and stretching mechanism:
It adopts separate sealing unit design, which don’t interfere with each other. Good sealing to blow the bottle, no leakage. Stretching rod is driven by one servo system.
Step 6
Mould opening and closing mechanism:
When preforms are transmitted to bottle blowing station, servo system drives swing arm to push the hinge for opening and closing movement to achieve bilateral activity.
Step 7
Connecting mechanism:
The finished bottles are taken out from bottle blowing station. The manipulators of connecting mechanism pick them up and transmit to Wash-fill-seal machine manipulator to realize auto connection production.
Advantages:
1.Servo drive and stable during high-speed movement, the positioning is accurate, durable, and the maintenance cost is low.
2.The cam clamping fingers without plastic scrap and powder to ensure product quality.
3.High production capacity: range from 4000-15000bottles per hour.
4.Closed integral chain structure, precise center distance, rings and other foreign objects cannot enter the chain, easy maintenance.
5.The sealing does not air leak, improve the blowing efficiency, shorten the bottle forming time.
Technical Specifications:
Item | Machine model | |||||
CPS4 | CPS6 | CPS8 | CPS10 | CPS12 | ||
Production capacity | 500ml | 4000BPH | 6000BPH | 8000BPH | 10000BPH | 12000BPH |
Max bottle height | mm | 240 | 230 | |||
Max preform height(with neck) | mm | 120 | 95 | |||
Compressed air (m³/min) | 8-10bar | 3 | 3 | 4.2 | 4.2 | 4.5 |
20bar | 2.5 | 2.5 | 4.5 | 6.0 | 10-12 | |
Chilled Water(m³/h) | 10°C(pressure: 3.5-4bar)8HP | 4 | 4 | 7.87 | 7.87 | 8-10 |
Cooling Water | 25°C(pressure: 2.5-3bar) | 6 | 10 | 8 | 8 | 8-10 |
Weight | T | 7.5 | 11 | 13.5 | 14 | 15 |
Machine size(with Preform loading) | (L×W×H)(MM) | 6500*4300*3500 | 8892*4800*3400 | 9450*4337*3400 | 10730x4337x3400 | 12960×5477×3715 |
PP Bottle Washing-filling-sealing Machine
Step 1
Bottle feeding station
It adopts direct link between conveying track and bottle feeding dial wheel, clamps the bottleneck to convey, with clean compressed air to accelerate the delivering, no scratching.
Step 2
Bottle ionic air washing station
The cleaning principle and process are: overturn the bottle; the suction pipe rises the cam to cover the bottle mouth; the ionic air pipe also rises to the bottle with the cam; the compressed air is blown into the blowing pipe to clean the bottle in the bottle;
And simultaneously suck the particles entrained in the airflow out of the bottle.
Step 3
Filling station
The washed plastic bottles are conveyed to filling station by manipulator, the filling nozzle trace plastic bottles for filling. The upper part of filling station is equipped with a constant-pressure liquid balance tank. When the liquid fills the balance tank and reaches to the setting level, the liquid feeding pneumatic diaphragm valve close.
Step 4
Hot melting sealing station
This station is mainly used to weld-sealing the cap of plastic infusion bottle after filling. It adopts double heating plates to heat caps and bottle ports separately, finish weld-sealing in non-contact hot-melt type. The heating temperature and time is adjustable.
Step 5
Bottle outfeeding station
The sealed bottles are conveyed to bottle outputting track through bottle outputting station, and enter into the next process.
Advantages:
1.With precise filling; accurate air discharging, can control the degree of deformation of the bottle after sterilization.
2.No bottle no filling, no bottle no capping.
3.It can reach capacities up to15,000BPH, depending on the customer request.
4.There are different types of caps which can be applied on the final bottle: Sealed Euro cap; Sealed Irrigation cap; Screw cap; Stopper and Aluminum cap.
5.It has a complete GMP-compliant cleaning and sterilization function.
Technical Specifications:
Item | Machine model | ||||
XGF(Q)/30/24/24 | XGF30/30/24/24 | XGF(Q)/36/30/36 | XGF(Q)/50/40/56 | ||
Production capacity | 100ml | 7000BPH | 7000BPH | 9000BPH | 14000BPH |
500ml | 6000BPH | 6000BPH | 7200BPH | 12000BPH | |
Applicable bottle size | ml | 50/100/250/500/1000 | |||
Air consumption | 0.5-0.7Mpa | 3m3/min | 3m3/min | 3m3/min | 4-6m3/min |
WFI consumption | 0.2-0.25Mpa | 1-1.5m3/h | |||
Machine weight | T | 6 | 6.5 | 7 | 9 |
Machine size | mm | 4.3*2.1*2.2 | 5.76*2.1*2.2 | 4.47*1.9*2.2 | 6.6*3.3*2.2 |
Power consumption | Main motor | 4 | 4 | 4 | 4 |
Capping oscillator | 0.5 | 0.5 |
0.5 |
0.5*2 | |
Ionic air | 0.25*6 | 0.25*5 |
0.25*6 |
0.25*9 | |
Conveyor motor | 0.37*2 | 0.37*2 |
0.37*2 |
0.37*3 | |
Heating plate | 6*2 | 6*2 |
6*2 |
8*3 |
Production line feature:
1.It can meet production of different size (100-1000ml).
2.It applied for both Standard PP bottle and Self-collapsed soft PP bottle.
3.Apply to different container shapes: round, oval, irregular, etc.
4.High production capacity: range from 4000-15000bottles per hour.
5.The wasted raw material for the production of one 500 ml PP bottle is equal to 0%.
Application in hospital:
Product detail pictures:
Related Product Guide:
We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for OEM/ODM Manufacturer Vial Filling Machine Isolator - PP Bottle IV Solution Production Line – IVEN , The product will supply to all over the world, such as: Benin, Gambia, Canberra, After years of development, we have formed strong ability in new product development and strict quality control system to ensure excellent quality and service. With the support of many long term cooperated customers, our products are welcomed all over the world.
By Belinda from Luxembourg - 2018.05.13 17:00
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Amy from Miami - 2017.09.16 13:44