High definition Ampoule Cutter Machine - Glass Bottle IV Solution Production Line – IVEN

Brief Introduction:

Send email to us

Product Detail

Product Tags

Feedback (2)

Bear Customer first, Excellent first in mind, we operate closely with our customers and supply them with efficient and expert services for 4 Head Ampoule Filling Machine, Ampoule Washing Machine, Vial Inspection Machine, We are anticipating to cooperate with you around the basis of mutual added benefits and common development. We are going to never disappoint you.

High definition Ampoule Cutter Machine - Glass Bottle IV Solution Production Line – IVEN Detail:

Introduction

Glass bottle IV solution production line is mainly used for IV solution glass bottle of 50-500ml washing, depyrogenation, filling and stoppering, capping. It can be used for the production of glucose, antibiotic, amino acid, fat emulsion, nutrient solution and biological agents and other liquid etc.

011

Product Video

Step 1

Washing machine:
This machine is used for the fine washing for infusion glass bottle, take turns to use the normal water, purified water, injection water, clean compressed air, fresh injection water and clean compressed air to washing the bottle in turns.

Step 2

Depyrogenation Tunnel
Laminar flow sterilization tunnel used for washed vial’s dry sterilization and remove heat, It can reach the highest temperature 300～350℃, efficient sterilization time for 5-10 minutes.
It has three working area (Preheat area, heating area, cooling area).

Step 3

Filling, Vacuuming, Nitrogen Charging, Stoppering Machine
Filling part adopts Germany GEMU valve filling, high precision.
Nitrogen charging immediately after filling, also nitrogen protection between the nitrogen charging and stoppering.

No bottles no filling, no bottles no vacuuming, no bottle no nitrogen charging, ensure the vacuum level in the air tank during vacuuming, meanwhile, make sure the oxygen residual after stoppering (control within 1.0%)。

Step 4

Filling and Stoppering Machine
Aseptic liquid filling machine is very accurate and stable operation. The filling volume can be directly adjusted through HMI, here we have ORABS equipped with stainless steel laminar air flow hood.

Step 5

Capping Machine
It is mainly used for glass bottles capping. Continuous operation. Picking up and crimping, at the same time rolling the cap. After the completion, the cap have the same size and edge smooth, good appearance. High-speed, low damaged.

Advantages:

1.Separate pipeline for cleaning medium, no cross-contamination, according to GMP requirements.
2.Filling head synchronously tracks filling, high filling accuracy.
3.Adopt full servo drive system, no mechanical transmission.
4.Nitrogen charging function can be configured (before filling, during filling, after filling).
5.Quick changeover time for different bottle size.

Application in hospital:

Technical Specifications:

Filling, Nitrogen Charging, Stoppering Machine

Item		Machine model
Item		CNGFS16/10	CNGFS24/10	CNGFS36/20	CNGFS48/20
Production capacity		60-100BPM	100-150BPM	150-300BPM	300-400BPM
Applied bottle size		50ml, 100ml, 250ml, 500ml
Filling accuracy		±1.5%
Compressed air (m³/h)	0.6Mpa	1.5	3	4	4.5
Power supply	KW	4	4	6	6
Weight	T	7.5	11	13.5	14
Machine size	(L×W×H)(MM)	250012502350	250015202350	315019002350	350023502350

Product detail pictures:

Related Product Guide:

The corporate upholds the philosophy of Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth, will keep on to serve outdated and new clients from home and abroad whole-heatedly for High definition Ampoule Cutter Machine - Glass Bottle IV Solution Production Line – IVEN , The product will supply to all over the world, such as: Las Vegas, Guinea, belarus, We are proud to supply our products to every costumer all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.

Ampoule Filling Machine India