English

Glass Bottle IV Solution Production Line

Glass Bottle IV Solution Production Line Featured Image
  • Glass Bottle IV Solution Production Line
  • Glass Bottle IV Solution Production Line
  • Glass Bottle IV Solution Production Line
  • Glass Bottle IV Solution Production Line

Brief Introduction:

Glass bottle IV solution production line is mainly used for IV solution glass bottle of 50-500ml washing, depyrogenation, filling and stoppering, capping. It can be used for the production of glucose, antibiotic, amino acid, fat emulsion, nutrient solution and biological agents and other liquid etc.


Product Detail

Product Tags

Introduction Of Glass Bottle IV Solution Production Line

3
2
iven-Glass-Bottle-IV

Glass bottle IV solution production line is mainly used for IV solution glass bottle of 50-500ml washing, depyrogenation, filling and stoppering, capping. It can be used for the production of glucose, antibiotic, amino acid, fat emulsion, nutrient solution and biological agents and other liquid etc.

Advantages Of Glass Bottle IV Solution Production Line

Separate pipeline for cleaning medium, no cross-contamination, according to GMP requirements.

Filling head synchronously tracks filling, high filling accuracy.

Adopt full servo drive system, no mechanical transmission.

Nitrogen charging function can be configured (before filling, during filling, after filling).

Quick changeover time for different bottle size.

Production Procedures Of Glass Bottle IV Solution Production Line

Washing machine

This machine is used for the fine washing for infusion glass bottle, take turns to use the normal water, purified water, injection water, clean compressed air, fresh injection water and clean compressed air to washing the bottle in turns.

4
5

Depyrogenation Tunnel

Laminar flow sterilization tunnel used for washed vial’s dry sterilization and remove heat, It can reach the highest temperature 300～350℃, efficient sterilization time for 5-10 minutes.
It has three working area (Preheat area, heating area, cooling area).

6

Filling, Vacuuming, Nitrogen Charging, Stoppering Machine

Filling part adopts Germany GEMU valve filling, high precision.

Nitrogen charging immediately after filling, also nitrogen protection between the nitrogen charging and stoppering.

No bottles no filling, no bottles no vacuuming, no bottle no nitrogen charging, ensure the vacuum level in the air tank during vacuuming, meanwhile, make sure the oxygen residual after stoppering (control within 1.0%)。

7
8
9

Filling and Stoppering Machine

Aseptic liquid filling machine is very accurate and stable operation. The filling volume can be directly adjusted through HMI, here we have ORABS equipped with stainless steel laminar air flow hood.

11

Capping Machine

It is mainly used for glass bottles capping. Continuous operation. Picking up and crimping, at the same time rolling the cap. After the completion, the cap have the same size and edge smooth, good appearance. High-speed, low damaged.

12
13
14

Tech Parameters Of Glass Bottle IV Solution Production Line

Filling, Nitrogen Charging, Stoppering Machine

Item Machine model
CNGFS16/10 CNGFS24/10 CNGFS36/20 CNGFS48/20
Production capacity 60-100BPM 100-150BPM 150-300BPM 300-400BPM
Applied bottle size 50ml, 100ml, 250ml, 500ml
Filling accuracy ±1.5%
Compressed air (m³/h) 0.6Mpa 1.5 3 4 4.5
Power supply KW 4 4 6 6
Weight T 7.5 11 13.5 14
Machine size (L×W×H)(MM) 2500*1250*2350 2500*1520*2350 3150*1900*2350 3500*2350*2350
  • Previous:
  • Next:

    • Send your message to us:

    Write your message here and send it to us

    Products categories

    Send your message to us:

    Write your message here and send it to us