English

China OEM Iv Solution Production Line – Plastic Bottle Lvp - Glass Bottle IV Solution Production Line – IVEN

China OEM Iv Solution Production Line – Plastic Bottle Lvp - Glass Bottle IV Solution Production Line – IVEN Featured Image
  • China OEM Iv Solution Production Line – Plastic Bottle Lvp - Glass Bottle IV Solution Production Line – IVEN
  • China OEM Iv Solution Production Line – Plastic Bottle Lvp - Glass Bottle IV Solution Production Line – IVEN
  • China OEM Iv Solution Production Line – Plastic Bottle Lvp - Glass Bottle IV Solution Production Line – IVEN

Brief Introduction:


Product Detail

Product Tags

Related Video

Feedback (2)

While in the past few years, our organization absorbed and digested innovative technologies both equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted for the advancement of Seidenader Vial Inspection Machine, Vial Washing Machine Validation Guidelines, Vial Counting Machine, We warmly welcome all standpoint inquiries from home and abroad to cooperate with us, and anticipate your correspondence.
China OEM Iv Solution Production Line – Plastic Bottle Lvp - Glass Bottle IV Solution Production Line – IVEN Detail:

Introduction

Glass bottle IV solution production line is mainly used for IV solution glass bottle of 50-500ml washing, depyrogenation, filling and stoppering, capping. It can be used for the production of glucose, antibiotic, amino acid, fat emulsion, nutrient solution and biological agents and other liquid etc.

011
2
3

Product Video

Step 1

Washing machine:
This machine is used for the fine washing for infusion glass bottle, take turns to use the normal water, purified water, injection water, clean compressed air, fresh injection water and clean compressed air to washing the bottle in turns.

4
5

Step 2

Depyrogenation Tunnel
Laminar flow sterilization tunnel used for washed vial’s dry sterilization and remove heat, It can reach the highest temperature 300～350℃, efficient sterilization time for 5-10 minutes.
It has three working area (Preheat area, heating area, cooling area).

6

Step 3

Filling, Vacuuming, Nitrogen Charging, Stoppering Machine
Filling part adopts Germany GEMU valve filling, high precision.
Nitrogen charging immediately after filling, also nitrogen protection between the nitrogen charging and stoppering.

No bottles no filling, no bottles no vacuuming, no bottle no nitrogen charging, ensure the vacuum level in the air tank during vacuuming, meanwhile, make sure the oxygen residual after stoppering (control within 1.0%)。

7
8
9

Step 4

Filling and Stoppering Machine
Aseptic liquid filling machine is very accurate and stable operation. The filling volume can be directly adjusted through HMI, here we have ORABS equipped with stainless steel laminar air flow hood.

11

Step 5

Capping Machine
It is mainly used for glass bottles capping. Continuous operation. Picking up and crimping, at the same time rolling the cap. After the completion, the cap have the same size and edge smooth, good appearance. High-speed, low damaged.

12
13
14

Advantages:

1.Separate pipeline for cleaning medium, no cross-contamination, according to GMP requirements.
2.Filling head synchronously tracks filling, high filling accuracy.
3.Adopt full servo drive system, no mechanical transmission.
4.Nitrogen charging function can be configured (before filling, during filling, after filling).
5.Quick changeover time for different bottle size.

Application in hospital:

15

Technical Specifications:

Filling, Nitrogen Charging, Stoppering Machine

Item

 Machine model

CNGFS16/10

 CNGFS24/10 CNGFS36/20 CNGFS48/20
Production capacity 60-100BPM 100-150BPM 150-300BPM 300-400BPM
Applied bottle size 50ml, 100ml, 250ml, 500ml
Filling accuracy ±1.5%
Compressed air (m³/h) 0.6Mpa 1.5 3 4 4.5
Power supply KW 4 4 6 6
Weight T 7.5 11 13.5 14
Machine size (L×W×H)(MM) 2500*1250*2350 2500*1520*2350 3150*1900*2350

3500*2350*2350
Product detail pictures:

China OEM Iv Solution Production Line – Plastic Bottle Lvp - Glass Bottle IV Solution Production Line – IVEN detail pictures

China OEM Iv Solution Production Line – Plastic Bottle Lvp - Glass Bottle IV Solution Production Line – IVEN detail pictures

China OEM Iv Solution Production Line – Plastic Bottle Lvp - Glass Bottle IV Solution Production Line – IVEN detail pictures

Related Product Guide:
Our concentrate on should be to consolidate and enhance the quality and service of present products, meanwhile consistently produce new products to meet unique customers' demands for China OEM Iv Solution Production Line – Plastic Bottle Lvp - Glass Bottle IV Solution Production Line – IVEN , The product will supply to all over the world, such as: Poland, Jeddah, Myanmar, Company name, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by ISO quality management standard strictly, creating top-ranking company by spirit of progress-marking honesty and optimism.
    • We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
    5 Stars By Ivy from Hanover - 2017.12.02 14:11
    In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
    5 Stars By Kimberley from Kuala Lumpur - 2018.09.29 17:23

    Send your message to us:

    Write your message here and send it to us

    Products categories

    Send your message to us:

    Write your message here and send it to us